saolonthisao
Youtube Master Race
- 5/11/06
- 35
- 0
tui có chơi đây nhưng test sao
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Test cái này trước đi rồi đến cái trên.Chủ yeu16 chúng ta cần ở đây là mấy cái hl2.exe để mở server từ ~console mà mấy cái CSS của Digital nó đã crack sẳntui có chơi đây nhưng test sao
Just folow these instrutions
Proper Instrutions
1. Make sure steam is turned off
2. Install it to Steam folder
3. Paste and replace engine.dll in "Steam\steamapps\common\left 4 dead\bin\"
4. Turn on the steam but DO NOT RUN THE GAME THROUGH IT otherwise you will get error "servers are busy" and engine.dll will get deleted.
5. Use left4dead.exe located in "Steam\steamapps\common\left 4 dead\"
If left4dead.exe or engine.dll is missing then Steam deleted it because you ran it through Steam. This was my first attempt and I had to re-download Steam and install the game again.
Another way to run without steam:
Copy all files into ANY HL2 game like Portal and instead of
Code: hl2.exe -game portal
use
Code: hl2.exe -game left4dead
I hope this will help some of you.
Another way to run without steam:
Copy all files into ANY HL2 game like Portal and instead of
Code: hl2.exe -game portal
use
Code: hl2.exe -game left4dead
Cái file ấy không phải là file chạy half life đâu mà cái file đó cho phép chạy tạo server mà không cân phải vào gameChỗ này mình ko hiểu, chẳng lẽ nó cần file HL2.exe để chạy game à. Chỗ này hơi giống phía trên, dùng file exe của HL2 rồi tạo shortcut và thêm code vào để nó chạy L4D.exe.
Cách này ai thử hiệu quả giơ tay nào.:hug:
Hey dude. I've been screwing around with Left 4 Dead all week and I think I have an answer for ya. NOTE: YOU DON'T NEED TO USE THE CRACKED ENGINE.DLL OR ANY OTHER CRACKED NONSENSE; ACTUALLY, USE THE ORIGINAL DLL IF YOU CAN. This is what you have to do to play Left 4 Dead on LAN without STEAM:
Have the computer that's going to run the listen server (the most powerful PC you got) run this batch command (either through .bat file or windows shortcut):
hl2.exe -game left4dead -console -novid +sv_allow_lobby_connect_only 0 +z_difficulty Impossible +map l4d_hospital01_apartment
And I'll actually explain the extra switches (sweet deal!). -console activates the console. Press the tidle (~) key to bring it up during the game to switch maps and stuff. -novid skips the intro video. +sv_allow_lobby_connect_only 0 makes sure you're able to connect to games via console command "connect xx.xx.xx.xx". +z_difficulty Impossible selects Expert difficulty. Other options instead of Impossible are Easy, Normal, and Hard. +map l4d_hospital01_apartment selects the first level of the game. Look in your maps folder to see the different levels you can pick. These end in .bsp
Here's a link to a PDF for all the Left 4 Dead console commands so you can customize at will:
http://www.left4dead411.com/l4d_cvar_list.pdf
The most important I think is: changelevel MAPNAME
so you can change the level during the game. YAY!
The other computers on the LAN should run this batch/shortcut:
hl2.exe -game left4dead -console -novid
After Left 4 Dead loads, the console will pop up and they should enter this at the prompt:
connect xxx.xxx.xxx.xxx
The xxx.xxx.xxx.xxx being the ip address of the computer that is running the server.
EXAMPLE: connect 192.168.0.102
That should work for ya. At least it did for me. I believe you could also apply this method to playing internet games using Hamachi, and without STEAM or cracked files/engine.
@backden cái đấy không phải lỗi mà ai cũng bị thế,ở bản demo sau khi vá thì chạy đuco75 cái file ấy và anh em đều chơi trên Wippien vấn đề sao giờ chạy đc cái ấy là mọi chuyện như xong khogn6 phụ thuộc vào bọn steam nữaHey dude. I've been screwing around with Left 4 Dead all week and I think I have an answer for ya. NOTE: YOU DON'T NEED TO USE THE CRACKED ENGINE.DLL OR ANY OTHER CRACKED NONSENSE; ACTUALLY, USE THE ORIGINAL DLL IF YOU CAN. This is what you have to do to play Left 4 Dead on LAN without STEAM:
Have the computer that's going to run the listen server (the most powerful PC you got) run this batch command (either through .bat file or windows shortcut):
hl2.exe -game left4dead -console -novid +sv_allow_lobby_connect_only 0 +z_difficulty Impossible +map l4d_hospital01_apartment
And I'll actually explain the extra switches (sweet deal!). -console activates the console. Press the tidle (~) key to bring it up during the game to switch maps and stuff. -novid skips the intro video. +sv_allow_lobby_connect_only 0 makes sure you're able to connect to games via console command "connect xx.xx.xx.xx". +z_difficulty Impossible selects Expert difficulty. Other options instead of Impossible are Easy, Normal, and Hard. +map l4d_hospital01_apartment selects the first level of the game. Look in your maps folder to see the different levels you can pick. These end in .bsp
Here's a link to a PDF for all the Left 4 Dead console commands so you can customize at will:
http://www.left4dead411.com/l4d_cvar_list.pdf
The most important I think is: changelevel MAPNAME
so you can change the level during the game. YAY!
The other computers on the LAN should run this batch/shortcut:
hl2.exe -game left4dead -console -novid
After Left 4 Dead loads, the console will pop up and they should enter this at the prompt:
connect xxx.xxx.xxx.xxx
The xxx.xxx.xxx.xxx being the ip address of the computer that is running the server.
EXAMPLE: connect 192.168.0.102
That should work for ya. At least it did for me. I believe you could also apply this method to playing internet games using Hamachi, and without STEAM or cracked files/engine.
dùng đơn giản mà